我正在使用 Java 和 Protoc 3.0 编译器，下面提到了我的原型(prototype)文件。 https://github.com/openconfig/public/blob/master/release/models/rpc/openconfig-rpc-api.yang

syntax = "proto3";

package Telemetry;

// Interface exported by Agent
service OpenConfigTelemetry {
    // Request an inline subscription for data at the specified path.
    // The device should send telemetry data back on the same
    // connection as the subscription request.
    rpc telemetrySubscribe(SubscriptionRequest)                     returns (stream OpenConfigData) {}

    // Terminates and removes an exisiting telemetry subscription
    rpc cancelTelemetrySubscription(CancelSubscriptionRequest)      returns (CancelSubscriptionReply) {}

    // Get the list of current telemetry subscriptions from the
    // target. This command returns a list of existing subscriptions
    // not including those that are established via configuration.
    rpc getTelemetrySubscriptions(GetSubscriptionsRequest)          returns (GetSubscriptionsReply) {}

    // Get Telemetry Agent Operational States
    rpc getTelemetryOperationalState(GetOperationalStateRequest)    returns (GetOperationalStateReply) {}

    // Return the set of data encodings supported by the device for
    // telemetry data
    rpc getDataEncodings(DataEncodingRequest)                       returns (DataEncodingReply) {}
}

// Message sent for a telemetry subscription request
message SubscriptionRequest {
    // Data associated with a telemetry subscription
    SubscriptionInput input                                 = 1;

    // List of data models paths and filters
    // which are used in a telemetry operation.
    repeated Path path_list                                 = 2;

    // The below configuration is not defined in Openconfig RPC.
    // It is a proposed extension to configure additional
    // subscription request features.
    SubscriptionAdditionalConfig additional_config          = 3;
}

// Data associated with a telemetry subscription
message SubscriptionInput {
    // List of optional collector endpoints to send data for
    // this subscription.
    // If no collector destinations are specified, the collector
    // destination is assumed to be the requester on the rpc channel.
    repeated Collector  collector_list                      = 1;
}

// Collector endpoints to send data specified as an ip+port combination.
message Collector {
    // IP address of collector endpoint
    string address                                          = 1;

    // Transport protocol port number for the collector destination.
    uint32 port                                             = 2;
}

// Data model path
message Path {
    // Data model path of interest
    // Path specification for elements of OpenConfig data models
    string path                                             = 1;

    // Regular expression to be used in filtering state leaves
    string filter                                           = 2;

    // If this is set to true, the target device will only send
    // updates to the collector upon a change in data value
    bool suppress_unchanged                                 = 3;

    // Maximum time in ms the target device may go without sending
    // a message to the collector. If this time expires with
    // suppress-unchanged set, the target device must send an update
    // message regardless if the data values have changed.
    uint32 max_silent_interval                              = 4;

    // Time in ms between collection and transmission of the
    // specified data to the collector platform. The target device
    // will sample the corresponding data (e.g,. a counter) and
    // immediately send to the collector destination.
    //
    // If sample-frequency is set to 0, then the network device
    // must emit an update upon every datum change.
    uint32 sample_frequency                                 = 5;
}

// Configure subscription request additional features.
message SubscriptionAdditionalConfig {
    // limit the number of records sent in the stream
    int32 limit_records                                     = 1;

    // limit the time the stream remains open
    int32 limit_time_seconds                                = 2;
}

// Reply to inline subscription for data at the specified path is done in
// two-folds.
// 1. Reply data message sent out using out-of-band channel.
// 2. Telemetry data send back on the same connection as the
//    subscription request.

// 1. Reply data message sent out using out-of-band channel.
message SubscriptionReply {
    // Response message to a telemetry subscription creation or
    // get request.
    SubscriptionResponse response                           = 1;

    // List of data models paths and filters
    // which are used in a telemetry operation.
    repeated Path path_list                                 = 2;
}

// Response message to a telemetry subscription creation or get request.
message SubscriptionResponse {
    // Unique id for the subscription on the device. This is
    // generated by the device and returned in a subscription
    // request or when listing existing subscriptions
    uint32 subscription_id = 1;
}

// 2. Telemetry data send back on the same connection as the
//    subscription request.
message OpenConfigData {
    // router name:export IP address
    string system_id                                        = 1;

    // line card / RE (slot number)
    uint32 component_id                                     = 2;

    // PFE (if applicable)
    uint32 sub_component_id                                 = 3;

    // Path specification for elements of OpenConfig data models
    string path                                             = 4;

    // Sequence number, monotonically increasing for each
    // system_id, component_id, sub_component_id + path.
    uint64 sequence_number                                  = 5;

    // timestamp (milliseconds since epoch)
    uint64 timestamp                                        = 6;

    // List of key-value pairs
    repeated KeyValue kv                                    = 7;
}

// Simple Key-value, where value could be one of scalar types
message KeyValue {
    // Key
    string key                                              =  1;

    // One of possible values
    oneof value {
        double double_value                                 =  5;
        int64  int_value                                    =  6;
        uint64 uint_value                                   =  7;
        sint64 sint_value                                   =  8;
        bool   bool_value                                   =  9;
        string str_value                                    = 10;
        bytes  bytes_value                                  = 11;
    }
}

// Message sent for a telemetry subscription cancellation request
message CancelSubscriptionRequest {
    // Subscription identifier as returned by the device when
    // subscription was requested
    uint32 subscription_id                                  = 1;
}

// Reply to telemetry subscription cancellation request
message CancelSubscriptionReply {
    // Return code
    ReturnCode code                                         = 1;

    // Return code string
    string     code_str                                     = 2;
};

// Result of the operation
enum ReturnCode {
    SUCCESS                                                 = 0;
    NO_SUBSCRIPTION_ENTRY                                   = 1;
    UNKNOWN_ERROR                                           = 2;
}

// Message sent for a telemetry get request
message GetSubscriptionsRequest {
    // Subscription identifier as returned by the device when
    // subscription was requested
    // --- or ---
    // 0xFFFFFFFF for all subscription identifiers
    uint32 subscription_id                                  = 1;
}

// Reply to telemetry subscription get request
message GetSubscriptionsReply {
    // List of current telemetry subscriptions
    repeated SubscriptionReply subscription_list            = 1;
}

// Message sent for telemetry agent operational states request
message GetOperationalStateRequest {
    // Per-subscription_id level operational state can be requested.
    //
    // Subscription identifier as returned by the device when
    // subscription was requested
    // --- or ---
    // 0xFFFFFFFF for all subscription identifiers including agent-level
    // operational stats
    // --- or ---
    // If subscription_id is not present then sent only agent-level
    // operational stats
    uint32 subscription_id                                  = 1;

    // Control verbosity of the output
    VerbosityLevel verbosity                                = 2;
}

// Verbosity Level
enum VerbosityLevel {
    DETAIL                                                  = 0;
    TERSE                                                   = 1;
    BRIEF                                                   = 2;
}

// Reply to telemetry agent operational states request
message GetOperationalStateReply {
    // List of key-value pairs where
    //     key      = operational state definition
    //     value    = operational state value
    repeated KeyValue kv                                    = 1;
}

// Message sent for a data encoding request
message DataEncodingRequest {
}

// Reply to data encodings supported request
message DataEncodingReply {
    repeated EncodingType  encoding_list                    = 1;
}

// Encoding Type Supported
enum EncodingType {
    UNDEFINED                                               = 0;
    XML                                                     = 1;
    JSON_IETF                                               = 2;
    PROTO3                                                  = 3;
}

为了执行服务调用 (rpc TelemetrySubscribe)，我首先需要读取具有订阅 ID 的 header ，然后开始读取消息。现在，使用 Java 我能够连接到该服务，我确实引入了拦截器，但是当我打印/检索 header 时它是空的。我调用拦截器的代码如下，

 ClientInterceptor interceptor = new HeaderClientInterceptor();
      originChannel = OkHttpChannelBuilder.forAddress(host, port)
        .usePlaintext(true)
        .build();
     Channel channel =  ClientInterceptors.intercept(originChannel, interceptor);
      telemetryStub = OpenConfigTelemetryGrpc.newStub(channel);

这是读取元数据的拦截器代码。

  @Override
  public <ReqT, RespT> ClientCall<ReqT, RespT> interceptCall(MethodDescriptor<ReqT, RespT> method,
      CallOptions callOptions, Channel next) {
    return new SimpleForwardingClientCall<ReqT, RespT>(next.newCall(method, callOptions)) {

      @Override
      public void start(Listener<RespT> responseListener, Metadata headers) {

        super.start(new SimpleForwardingClientCallListener<RespT>(responseListener) {
          @Override
          public void onHeaders(Metadata headers) {

             Key<String> CUSTOM_HEADER_KEY = Metadata.Key.of("responseKEY", Metadata.ASCII_STRING_MARSHALLER);

            System.out.println("Contains Key?? "+headers.containsKey(CUSTOM_HEADER_KEY));

想知道有没有其他方法可以读取其中包含订阅 ID 的元数据或第一条消息？我只需要读取具有订阅 ID 的第一条消息，并将相同的订阅 ID 返回给服务器，以便流式传输可以开始我有使用相同 proto 文件的等效 Python 代码，它通过下面提到的代码与服务器通信，仅供引用:

     sub_req = SubscribeRequestMsg("host",port)
     data_itr = stub.telemetrySubscribe(sub_req, _TIMEOUT_SECONDS)
     metadata = data_itr.initial_metadata()

                   if metadata[0][0] == "responseKey":
                    metainfo = metadata[0][1]
                    print metainfo

                    subreply = agent_pb2.SubscriptionReply()
                    subreply.SetInParent()
                    google.protobuf.text_format.Merge(metainfo, subreply)

                    if subreply.response.subscription_id:
                    SUB_ID = subreply.response.subscription_id

从上面的 python 代码我可以轻松检索元数据对象，不确定如何使用 Java 检索相同的对象？

阅读元数据后，我得到的是:Metadata({content-type=[application/grpc], grpc-encoding=[identity], grpc-accept-encoding=[identity,deflate,gzip]} )

但是我知道从元数据到它还有一行，就是

response {
  subscription_id: 2
}

我如何从其中包含订阅 ID 的 header 中提取最后的响应。我确实尝试了很多选择，但我在这里迷路了。

最佳答案

您使用的方法是用于请求元数据，而不是响应元数据:

public void start(Listener<RespT> responseListener, Metadata headers) {

对于响应元数据，您将需要一个 ClientCall.Listener 并等待 onHeaders 回调:

public void onHeaders(Metadata headers)

我确实觉得您提到的元数据的用法似乎很奇怪。元数据通常用于附加错误详细信息或不特定于 RPC 方法的横切功能(如身份验证、跟踪等)。

关于java - 如何在客户端使用 Java 读取 gRPC 中的元数据，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/43479217/