iphone - 使用 UIPinchGestureRecognizer 单方向缩放 uiviews

coder 2023-09-22 原文

我想知道如何使用 UIPinchGestureRecognizer 单独在单个(x 或 y)方向上缩放 UIView。比如说，如果用户仅在一个方向(水平)上以捏合手势移动他的两根手指，则只有 uiview 的宽度应该增加/减小，如果手指仅垂直移动，则高度应该改变。如果手指沿对角线移动，则 uiview 的高度和宽度都应增加/减少。我看过 Apple 的 MoveMe 示例代码。

UIPinchGestureRecognizer *pinchGesture = [[UIPinchGestureRecognizer alloc] initWithTarget:self action:@selector(scalePiece:)];
[pinchGesture setDelegate:self];
[piece addGestureRecognizer:pinchGesture];
[pinchGesture release];

比例尺:

- (void)scalePiece:(UIPinchGestureRecognizer *)gestureRecognizer
{
    UIView *piece = (UIView *) [gestureRecognizer view];
    NSLog(@"scalePiece enter");
    if ([gestureRecognizer state] == UIGestureRecognizerStateBegan){
          NSLog(@"inside if");
          lastTouchPosition = [gestureRecognizer locationInView:piece];
    } 
    else if ([gestureRecognizer state] == UIGestureRecognizerStateBegan || [gestureRecognizer state] == UIGestureRecognizerStateChanged){
          NSLog(@"inside else");
          CGPoint currentTouchLocation = [gestureRecognizer locationInView:piece];
          NSLog(@"currentTouchLocation = %@ and lastTouchPosition= %@",NSStringFromCGPoint(currentTouchLocation), NSStringFromCGPoint(lastTouchPosition));
          CGPoint deltaMove = [self calculatePointDistancewithPoint1:currentTouchLocation andPoint2:lastTouchPosition];
          NSLog(@"deltaMove = %@",NSStringFromCGPoint(deltaMove));
          float distance = sqrt(deltaMove.x*deltaMove.x + deltaMove.y*deltaMove.y);
          NSLog(@"distance = %f",distance);
          float hScale = 1 - deltaMove.x/distance * (1-gestureRecognizer.scale);
          float vScale = 1 - deltaMove.y/distance * (1-gestureRecognizer.scale);
          if (distance == 0) {
                     hScale = 1;
                     vScale = 1;
          }
          NSLog(@"[gestureRecognizer scale] = %f",[gestureRecognizer scale]);
          NSLog(@"hScale = %f and vScale = %f",hScale, vScale);
          piece.transform = CGAffineTransformScale([piece transform], hScale, vScale);
          [gestureRecognizer setScale:1];
          lastTouchPosition = currentTouchLocation;
    }
    NSLog(@"scalePiece exit");
}

计算距离:

- (CGPoint) calculatePointDistancewithPoint1:(CGPoint)point1 andPoint2:(CGPoint) point2 {
    return CGPointMake(point2.x - point1.x, point2.y - point1.y);
}

这是当我尝试捏出(放大) View 时仅在垂直方向移动我的手指时的日志输出。元素的高度不会增加。

2011-07-21 13:06:56.245 New[8169:707] scalePiece enter
2011-07-21 13:06:56.248 New[8169:707] inside if
2011-07-21 13:06:56.251 New[8169:707] scalePiece exit
2011-07-21 13:06:56.259 New[8169:707] scalePiece enter
2011-07-21 13:06:56.262 New[8169:707] inside else
2011-07-21 13:06:56.264 New[8169:707] currentTouchLocation = {88, 87} and lastTouchPosition= {87, 86}
2011-07-21 13:06:56.265 New[8169:707] deltaMove = {-1, -1}
2011-07-21 13:06:56.267 New[8169:707] distance = 1.414214
2011-07-21 13:06:56.268 New[8169:707] [gestureRecognizer scale] = 1.102590
2011-07-21 13:06:56.271 New[8169:707] hScale = 0.927458 and vScale = 0.927458
2011-07-21 13:06:56.272 New[8169:707] scalePiece exit
2011-07-21 13:06:56.281 New[8169:707] scalePiece enter
2011-07-21 13:06:56.283 New[8169:707] inside else
2011-07-21 13:06:56.284 New[8169:707] currentTouchLocation = {87, 89} and lastTouchPosition= {88, 87}
2011-07-21 13:06:56.286 New[8169:707] deltaMove = {1, -2}
2011-07-21 13:06:56.287 New[8169:707] distance = 2.236068
2011-07-21 13:06:56.296 New[8169:707] [gestureRecognizer scale] = 1.096172
2011-07-21 13:06:56.298 New[8169:707] hScale = 1.043009 and vScale = 0.913981
2011-07-21 13:06:56.299 New[8169:707] scalePiece exit
2011-07-21 13:06:56.302 New[8169:707] scalePiece enter
2011-07-21 13:06:56.303 New[8169:707] inside else
2011-07-21 13:06:56.305 New[8169:707] currentTouchLocation = {88, 89} and lastTouchPosition= {87, 89}
2011-07-21 13:06:56.309 New[8169:707] deltaMove = {-1, 0}
2011-07-21 13:06:56.311 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.313 New[8169:707] [gestureRecognizer scale] = 1.066320
2011-07-21 13:06:56.314 New[8169:707] hScale = 0.933680 and vScale = 1.000000
2011-07-21 13:06:56.316 New[8169:707] scalePiece exit
2011-07-21 13:06:56.318 New[8169:707] scalePiece enter
2011-07-21 13:06:56.320 New[8169:707] inside else
2011-07-21 13:06:56.329 New[8169:707] currentTouchLocation = {88, 90} and lastTouchPosition= {88, 89}
2011-07-21 13:06:56.331 New[8169:707] deltaMove = {0, -1}
2011-07-21 13:06:56.333 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.334 New[8169:707] [gestureRecognizer scale] = 1.061696
2011-07-21 13:06:56.335 New[8169:707] hScale = 1.000000 and vScale = 0.938304
2011-07-21 13:06:56.338 New[8169:707] scalePiece exit
2011-07-21 13:06:56.343 New[8169:707] scalePiece enter
2011-07-21 13:06:56.346 New[8169:707] inside else
2011-07-21 13:06:56.347 New[8169:707] currentTouchLocation = {88, 92} and lastTouchPosition= {88, 90}
2011-07-21 13:06:56.349 New[8169:707] deltaMove = {0, -2}
2011-07-21 13:06:56.350 New[8169:707] distance = 2.000000
2011-07-21 13:06:56.351 New[8169:707] [gestureRecognizer scale] = 1.096869
2011-07-21 13:06:56.353 New[8169:707] hScale = 1.000000 and vScale = 0.903131
2011-07-21 13:06:56.362 New[8169:707] scalePiece exit
2011-07-21 13:06:56.366 New[8169:707] scalePiece enter
2011-07-21 13:06:56.370 New[8169:707] inside else
2011-07-21 13:06:56.373 New[8169:707] currentTouchLocation = {88, 92} and lastTouchPosition= {88, 92}
2011-07-21 13:06:56.376 New[8169:707] deltaMove = {0, 0}
2011-07-21 13:06:56.380 New[8169:707] distance = 0.000000
2011-07-21 13:06:56.383 New[8169:707] [gestureRecognizer scale] = 1.035330
2011-07-21 13:06:56.387 New[8169:707] hScale = 1.000000 and vScale = 1.000000
2011-07-21 13:06:56.389 New[8169:707] scalePiece exit
2011-07-21 13:06:56.393 New[8169:707] scalePiece enter
2011-07-21 13:06:56.397 New[8169:707] inside else
2011-07-21 13:06:56.399 New[8169:707] currentTouchLocation = {88, 93} and lastTouchPosition= {88, 92}
2011-07-21 13:06:56.403 New[8169:707] deltaMove = {0, -1}
2011-07-21 13:06:56.406 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.409 New[8169:707] [gestureRecognizer scale] = 1.042659
2011-07-21 13:06:56.412 New[8169:707] hScale = 1.000000 and vScale = 0.957341
2011-07-21 13:06:56.414 New[8169:707] scalePiece exit
2011-07-21 13:06:56.419 New[8169:707] scalePiece enter
2011-07-21 13:06:56.422 New[8169:707] inside else
2011-07-21 13:06:56.425 New[8169:707] currentTouchLocation = {88, 92} and lastTouchPosition= {88, 93}
2011-07-21 13:06:56.427 New[8169:707] deltaMove = {0, 1}
2011-07-21 13:06:56.430 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.432 New[8169:707] [gestureRecognizer scale] = 1.024549
2011-07-21 13:06:56.436 New[8169:707] hScale = 1.000000 and vScale = 1.024549
2011-07-21 13:06:56.439 New[8169:707] scalePiece exit
2011-07-21 13:06:56.442 New[8169:707] scalePiece enter
2011-07-21 13:06:56.447 New[8169:707] inside else
2011-07-21 13:06:56.450 New[8169:707] currentTouchLocation = {88, 92} and lastTouchPosition= {88, 92}
2011-07-21 13:06:56.453 New[8169:707] deltaMove = {0, 0}
2011-07-21 13:06:56.455 New[8169:707] distance = 0.000000
2011-07-21 13:06:56.458 New[8169:707] [gestureRecognizer scale] = 1.007702
2011-07-21 13:06:56.460 New[8169:707] hScale = 1.000000 and vScale = 1.000000
2011-07-21 13:06:56.464 New[8169:707] scalePiece exit
2011-07-21 13:06:56.501 New[8169:707] scalePiece enter
2011-07-21 13:06:56.504 New[8169:707] inside else
2011-07-21 13:06:56.507 New[8169:707] currentTouchLocation = {89, 92} and lastTouchPosition= {88, 92}
2011-07-21 13:06:56.509 New[8169:707] deltaMove = {-1, 0}
2011-07-21 13:06:56.510 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.511 New[8169:707] [gestureRecognizer scale] = 1.000283
2011-07-21 13:06:56.513 New[8169:707] hScale = 0.999717 and vScale = 1.000000
2011-07-21 13:06:56.517 New[8169:707] scalePiece exit
2011-07-21 13:06:56.566 New[8169:707] scalePiece enter
2011-07-21 13:06:56.570 New[8169:707] inside else
2011-07-21 13:06:56.572 New[8169:707] currentTouchLocation = {89, 91} and lastTouchPosition= {89, 92}
2011-07-21 13:06:56.573 New[8169:707] deltaMove = {0, 1}
2011-07-21 13:06:56.575 New[8169:707] distance = 1.000000
2011-07-21 13:06:56.576 New[8169:707] [gestureRecognizer scale] = 1.008267
2011-07-21 13:06:56.579 New[8169:707] hScale = 1.000000 and vScale = 1.008267
2011-07-21 13:06:56.582 New[8169:707] scalePiece exit
2011-07-21 13:06:56.585 New[8169:707] scalePiece enter
2011-07-21 13:06:56.586 New[8169:707] inside else
2011-07-21 13:06:56.588 New[8169:707] currentTouchLocation = {89, 91} and lastTouchPosition= {89, 91}
2011-07-21 13:06:56.589 New[8169:707] deltaMove = {0, 0}
2011-07-21 13:06:56.591 New[8169:707] distance = 0.000000
2011-07-21 13:06:56.597 New[8169:707] [gestureRecognizer scale] = 1.000000
2011-07-21 13:06:56.599 New[8169:707] hScale = 1.000000 and vScale = 1.000000
2011-07-21 13:06:56.600 New[8169:707] scalePiece exit
2011-07-21 13:06:56.603 New[8169:707] scalePiece enter
2011-07-21 13:06:56.604 New[8169:707] inside else
2011-07-21 13:06:56.606 New[8169:707] currentTouchLocation = {89, 182} and lastTouchPosition= {89, 91}
2011-07-21 13:06:56.607 New[8169:707] deltaMove = {0, -91}
2011-07-21 13:06:56.617 New[8169:707] distance = 91.000000
2011-07-21 13:06:56.620 New[8169:707] [gestureRecognizer scale] = 1.000000
2011-07-21 13:06:56.623 New[8169:707] hScale = 1.000000 and vScale = 1.000000
2011-07-21 13:06:56.626 New[8169:707] scalePiece exit
2011-07-21 13:06:56.630 New[8169:707] scalePiece enter
2011-07-21 13:06:56.632 New[8169:707] scalePiece exit

最佳答案

如果我对您的问题的理解正确，您的目标是沿水平轴和垂直轴进行非比例缩放。在这种情况下，事情归结为提供仿射变换:

  piece.transform = CGAffineTransformScale([piece transform], hScale, vScale);

具有不同的比例因子。

计算它们的一种方法如下:

在您的类中定义一个 ivar 来存储 lastTouchPosition；

在您的手势处理程序中，您将执行如下操作:

if ([gestureRecognizer state] == UIGestureRecognizerStateBegan){

   lastTouchPosition = [gestureRecognize locationInView:yourViewHere];
   hScale = 1;
   vScale = 1;

} else if ([gestureRecognizer state] == UIGestureRecognizerStateBegan || [gestureRecognizer state] == UIGestureRecognizerStateChanged){

   CGPoint currentTouchLocation = [gestureRecognize locationInView:yourViewHere];
   CGPoint deltaMove = CGPointDistance(currentTouchLocation, lastTouchPosition);
   float distance = sqrt(deltaMove.x*deltaMove.x + deltaMove.y*deltaMove.y);
   hScale -= abs(deltaMove.x)/distance * (1-gestureRecognizer.scale);
   vScale -= abs(deltaMove.y)/distance * (1-gestureRecognizer.scale);
   piece.transform = CGAffineTransformScale([piece transform], hScale, vScale);
   [gestureRecognizer setScale:1];

   lastTouchPosition = currentTouchLocation;
}

另一种方法是:

    if ([gestureRecognizer state] == UIGestureRecognizerStateBegan){

       lastTouchPosition = [gestureRecognize locationInView:yourViewHere];

    } else if ([gestureRecognizer state] == UIGestureRecognizerStateBegan || [gestureRecognizer state] == UIGestureRecognizerStateChanged){

       CGPoint currentTouchLocation = [gestureRecognize locationInView:yourViewHere];
       CGPoint deltaMove = CGPointDistance(currentTouchLocation, lastTouchPosition);
       float distance = sqrt(deltaMove.x*deltaMove.x + deltaMove.y*deltaMove.y);
       float hScale = 1 - abs(deltaMove.x)/distance * (1-gestureRecognizer.scale);
       float vScale = 1 - abs(deltaMove.y)/distance * (1-gestureRecognizer.scale);
       piece.transform = CGAffineTransformScale([piece transform], hScale, vScale);

       lastTouchPosition = currentTouchLocation;
    }

这不会在每次迭代时存储当前的 hFloat 和 vFloat 而是依赖于 gestureRecognizer 将累积整体比例这一事实改变。它进行“绝对”计算，而第一个实现进行“相对”计算。

请注意，您还需要定义 CGPointDistance 来计算两次触摸之间的距离，并选择要使用哪个 View 来计算距离(yourViewHere)。

编辑:

CGPoint CGPointDistance(CGPoint point1, CGPoint point2)
{
    return = CGPointMake(point2.x - point1.x, point2.y - point1.y);
};

EDIT2:关于计算缩放比例的公式

这个想法是计算比例因子的变化，并根据它们的相对变化将其应用于两个方向(x 和 y)。

比例因子增量为:1-gestureRecognizer.scale;
增量乘以一个因子，因此它与沿水平或垂直轴的位移成正比；当位移为零时，增量刻度也为零；当位移沿两轴相等时，尺度增量沿两轴也相等；我决定除以 distance，但还有其他可能性(例如除以两个 deltaMoves 的总和或除以 deltaMoves 的最大值等)。
最终从元素的当前比例中减去调整后的增量。

关于iphone - 使用 UIPinchGestureRecognizer 单方向缩放 uiviews，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/6759028/

单方 UIPinchGestureRecognizer 2011 8169 707 iphone objective-c ios ipad uigesturerecognizer

有关iphone - 使用 UIPinchGestureRecognizer 单方向缩放 uiviews的更多相关文章

ruby - 如何使用 Nokogiri 的 xpath 和 at_xpath 方法 - 2
我正在学习如何使用Nokogiri，根据这段代码我遇到了一些问题:require'rubygems'require'mechanize'post_agent=WWW::Mechanize.newpost_page=post_agent.get('http://www.vbulletin.org/forum/showthread.php?t=230708')puts"\nabsolutepathwithtbodygivesnil"putspost_page.parser.xpath('/html/body/div/div/div/div/div/table/tbody/tr/td/div
ruby - 使用 RubyZip 生成 ZIP 文件时设置压缩级别 - 2
我有一个Ruby程序，它使用rubyzip压缩XML文件的目录树。gem。我的问题是文件开始变得很重，我想提高压缩级别，因为压缩时间不是问题。我在rubyzipdocumentation中找不到一种为创建的ZIP文件指定压缩级别的方法。有人知道如何更改此设置吗？是否有另一个允许指定压缩级别的Ruby库？最佳答案这是我通过查看rubyzip内部创建的代码。level=Zlib::BEST_COMPRESSIONZip::ZipOutputStream.open(zip_file)do|zip|Dir.glob("**/*")d
ruby - 为什么我可以在 Ruby 中使用 Object#send 访问私有(private)/ protected 方法？ - 2
类classAprivatedeffooputs:fooendpublicdefbarputs:barendprivatedefzimputs:zimendprotecteddefdibputs:dibendendA的实例a=A.new测试a.foorescueputs:faila.barrescueputs:faila.zimrescueputs:faila.dibrescueputs:faila.gazrescueputs:fail测试输出failbarfailfailfail.发送测试[:foo,:bar,:zim,:dib,:gaz].each{|m|a.send(m)resc
ruby-on-rails - 使用 Ruby on Rails 进行自动化测试 - 最佳实践 - 2
很好奇，就使用rubyonrails自动化单元测试而言，你们正在做什么？您是否创建了一个脚本来在cron中运行rake作业并将结果邮寄给您？git中的预提交Hook？只是手动调用？我完全理解测试，但想知道在错误发生之前捕获错误的最佳实践是什么。让我们理所当然地认为测试本身是完美无缺的，并且可以正常工作。下一步是什么以确保他们在正确的时间将可能有害的结果传达给您？最佳答案不确定您到底想听什么，但是有几个级别的自动代码库控制:在处理某项功能时，您可以使用类似autotest的内容获得关于哪些有效，哪些无效的即时反馈。要确保您的提
ruby - 在 Ruby 中使用匿名模块 - 2
假设我做了一个模块如下:m=Module.newdoclassCendend三个问题:除了对m的引用之外，还有什么方法可以访问C和m中的其他内容？我可以在创建匿名模块后为其命名吗(就像我输入“module...”一样)？如何在使用完匿名模块后将其删除，使其定义的常量不再存在？最佳答案三个答案:是的，使用ObjectSpace.此代码使c引用你的类(class)C不引用m:c=nilObjectSpace.each_object{|obj|c=objif(Class===objandobj.name=~/::C$/)}当然这取决于
ruby - 使用 ruby 和 savon 的 SOAP 服务 - 2
我正在尝试使用ruby和Savon来使用网络服务。测试服务为http://www.webservicex.net/WS/WSDetails.aspx?WSID=9&CATID=2require'rubygems'require'savon'client=Savon::Client.new"http://www.webservicex.net/stockquote.asmx?WSDL"client.get_quotedo|soap|soap.body={:symbol=>"AAPL"}end返回SOAP异常。检查soap信封，在我看来soap请求没有正确的命名空间。任何人都可以建议我
python - 如何使用 Ruby 或 Python 创建一系列高音调和低音调的蜂鸣声？ - 2
关闭。这个问题是opinion-based.它目前不接受答案。想要改进这个问题？更新问题，以便editingthispost可以用事实和引用来回答它.关闭4年前。Improvethisquestion我想在固定时间创建一系列低音和高音调的哔哔声。例如:在150毫秒时发出高音调的蜂鸣声在151毫秒时发出低音调的蜂鸣声200毫秒时发出低音调的蜂鸣声250毫秒的高音调蜂鸣声有没有办法在Ruby或Python中做到这一点？我真的不在乎输出编码是什么(.wav、.mp3、.ogg等等)，但我确实想创建一个输出文件。
ruby-on-rails - 'compass watch' 是如何工作的/它是如何与 rails 一起使用的 - 2
我在我的项目目录中完成了compasscreate.和compassinitrails。几个问题:我已将我的.sass文件放在public/stylesheets中。这是放置它们的正确位置吗？当我运行compasswatch时，它不会自动编译这些.sass文件。我必须手动指定文件:compasswatchpublic/stylesheets/myfile.sass等。如何让它自动运行？文件ie.css、print.css和screen.css已放在stylesheets/compiled。如何在编译后不让它们重新出现的情况下删除它们？我自己编译的.sass文件编译成compiled/t
ruby - 使用 ruby 将 HTML 转换为纯文本并维护结构/格式 - 2
我想将html转换为纯文本。不过，我不想只删除标签，我想智能地保留尽可能多的格式。为插入换行符标签，检测段落并格式化它们等。输入非常简单，通常是格式良好的html(不是整个文档，只是一堆内容，通常没有anchor或图像)。我可以将几个正则表达式放在一起，让我达到80%，但我认为可能有一些现有的解决方案更智能。最佳答案首先，不要尝试为此使用正则表达式。很有可能你会想出一个脆弱/脆弱的解决方案，它会随着HTML的变化而崩溃，或者很难管理和维护。您可以使用Nokogiri快速解析HTML并提取文本:require'nokogiri'h
ruby - 在 64 位 Snow Leopard 上使用 rvm、postgres 9.0、ruby 1.9.2-p136 安装 pg gem 时出现问题 - 2
我想为Heroku构建一个Rails3应用程序。他们使用Postgres作为他们的数据库，所以我通过MacPorts安装了postgres9.0。现在我需要一个postgresgem并且共识是出于性能原因你想要pggem。但是我对我得到的错误感到非常困惑当我尝试在rvm下通过geminstall安装pg时。我已经非常明确地指定了所有postgres目录的位置可以找到但仍然无法完成安装:$envARCHFLAGS='-archx86_64'geminstallpg--\--with-pg-config=/opt/local/var/db/postgresql90/defaultdb/po

iphone - 使用 UIPinchGestureRecognizer 单方向缩放 uiviews

有关iphone - 使用 UIPinchGestureRecognizer 单方向缩放 uiviews的更多相关文章

随机推荐