昨天，在有关适用于 iPad 2 的全新 Garageband 的演示中，Apple 演示了一个有趣的功能:使用加速度计检测敲击压力。 (参见 Garageband page 上的鼓部分。)

我想知道如果 iPad 平放在 table 上，它应该如何工作。没有运动，没有可测量的加速度，不是吗？

最佳答案

一些很好的答案。这是一些工作代码。我将其实现为 UIGestureRecognizer 的子类，这样您就可以将其放入并附加到 UIView 或 UIButton。一旦触发，它将“压力”设置为 0.0f 和 2.0f 之间的 float 值。您可以选择设置识别所需的最小和最大压力。享受吧。

//
//  CPBPressureTouchGestureRecognizer.h
//  PressureSensitiveButton
//
//  Created by Anthony Picciano on 3/21/11.
//  Copyright 2011 Anthony Picciano. All rights reserved.
//
//  Redistribution and use in source and binary forms, with or without
//  modification, are permitted provided that the following conditions
//  are met:
//  1. Redistributions of source code must retain the above copyright
//     notice, this list of conditions and the following disclaimer.
//  2. Redistributions in binary form must reproduce the above copyright
//     notice, this list of conditions and the following disclaimer in the
//     documentation and/or other materials provided with the distribution.
//  
//  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
//  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
//  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
//  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
//  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//

#import <UIKit/UIKit.h>

#define CPBPressureNone         0.0f
#define CPBPressureLight        0.1f
#define CPBPressureMedium       0.3f
#define CPBPressureHard         0.8f
#define CPBPressureInfinite     2.0f

@interface CPBPressureTouchGestureRecognizer : UIGestureRecognizer <UIAccelerometerDelegate> {
    @public
    float pressure;
    float minimumPressureRequired;
    float maximumPressureRequired;

    @private
    float pressureValues[30];
    uint currentPressureValueIndex;
    uint setNextPressureValue;
}

@property (readonly, assign) float pressure;
@property (readwrite, assign) float minimumPressureRequired;
@property (readwrite, assign) float maximumPressureRequired;

@end


//
//  CPBPressureTouchGestureRecognizer.h
//  PressureSensitiveButton
//
//  Created by Anthony Picciano on 3/21/11.
//  Copyright 2011 Anthony Picciano. All rights reserved.
//
//  Redistribution and use in source and binary forms, with or without
//  modification, are permitted provided that the following conditions
//  are met:
//  1. Redistributions of source code must retain the above copyright
//     notice, this list of conditions and the following disclaimer.
//  2. Redistributions in binary form must reproduce the above copyright
//     notice, this list of conditions and the following disclaimer in the
//     documentation and/or other materials provided with the distribution.
//  
//  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
//  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
//  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
//  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
//  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//

#import <UIKit/UIGestureRecognizerSubclass.h>
#import "CPBPressureTouchGestureRecognizer.h"

#define kUpdateFrequency            60.0f
#define KNumberOfPressureSamples    3

@interface CPBPressureTouchGestureRecognizer (private)
- (void)setup;
@end

@implementation CPBPressureTouchGestureRecognizer
@synthesize pressure, minimumPressureRequired, maximumPressureRequired;

- (id)initWithTarget:(id)target action:(SEL)action {
    self = [super initWithTarget:target action:action];
    if (self != nil) {
       [self setup]; 
    }
    return self;
}

- (id)init {
    self = [super init];
    if (self != nil) {
        [self setup];
    }
    return self;
}

- (void)setup {
    minimumPressureRequired = CPBPressureNone;
    maximumPressureRequired = CPBPressureInfinite;
    pressure = CPBPressureNone;

    [[UIAccelerometer sharedAccelerometer] setUpdateInterval:1.0f / kUpdateFrequency];
    [[UIAccelerometer sharedAccelerometer] setDelegate:self];
}

#pragma -
#pragma UIAccelerometerDelegate methods

-(void)accelerometer:(UIAccelerometer *)accelerometer didAccelerate:(UIAcceleration *)acceleration {
    int sz = (sizeof pressureValues) / (sizeof pressureValues[0]);

    // set current pressure value
    pressureValues[currentPressureValueIndex%sz] = acceleration.z;

    if (setNextPressureValue > 0) {

        // calculate average pressure
        float total = 0.0f;
        for (int loop=0; loop<sz; loop++) total += pressureValues[loop]; 
        float average = total / sz;

        // start with most recent past pressure sample
        if (setNextPressureValue == KNumberOfPressureSamples) {
            float mostRecent = pressureValues[(currentPressureValueIndex-1)%sz];
            pressure = fabsf(average - mostRecent);
        }

        // caluculate pressure as difference between average and current acceleration
        float diff = fabsf(average - acceleration.z);
        if (pressure < diff) pressure = diff;
        setNextPressureValue--;

        if (setNextPressureValue == 0) {
            if (pressure >= minimumPressureRequired && pressure <= maximumPressureRequired)
                self.state = UIGestureRecognizerStateRecognized;
            else
                self.state = UIGestureRecognizerStateFailed;
        }
    }

    currentPressureValueIndex++;
}

#pragma -
#pragma UIGestureRecognizer subclass methods

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    setNextPressureValue = KNumberOfPressureSamples;
    self.state = UIGestureRecognizerStatePossible;
}

- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event {
    self.state = UIGestureRecognizerStateFailed;
}

- (void)reset {
    pressure = CPBPressureNone;
    setNextPressureValue = 0;
    currentPressureValueIndex = 0;
}

@end

关于ios - 利用加速度计检测敲击压力强度，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/5179426/