jjzjj

ios - 如何在 UIPageViewcontroller 中添加两个 View Controller

coder 2023-07-24 原文

我在 iPad 上使用 UIPageViewController,我需要在第一页横向显示 firstviewController,在下一页横向显示 ContentViewController

如果我用两个 viewControllers 设置 NSArray 应用程序在 [self.pagviewController setViewController:] 处崩溃,但出现以下异常:

The number of provided view controllers (2) doesn't match the number required (1) for the requested spine location (UIPageViewControllerSpineLocationMin)

代码如下:

#pragma mark - UIPageViewControllerDataSource Methods

- (UIViewController *)pageViewController:(UIPageViewController *)pageViewController 
      viewControllerBeforeViewController:(UIViewController *)viewController
{
    NSUInteger currentIndex = [self.modelArray indexOfObject:[(ContentViewController *)viewController textContents]];
    if(currentIndex == 0)
    {
        return nil;
    }
    ContentViewController *contentViewController = [[ContentViewController alloc] init];
    contentViewController.textContents = [self.modelArray objectAtIndex:currentIndex - 1];
    return contentViewController;
}

- (UIViewController *)pageViewController:(UIPageViewController *)pageViewController
       viewControllerAfterViewController:(UIViewController *)viewController
{
    NSUInteger currentIndex = [self.modelArray indexOfObject:[(ContentViewController *)viewController textContents]];
    if(currentIndex == self.modelArray.count-1)
    {
        return nil;
    }
    ContentViewController *contentViewController = [[ContentViewController alloc] init];
    contentViewController.textContents = [self.modelArray objectAtIndex:currentIndex + 1];

    return contentViewController;
}




//#pragma mark - UIPageViewControllerDelegate Methods

- (UIPageViewControllerSpineLocation)pageViewController:(UIPageViewController *)pageViewController
                   spineLocationForInterfaceOrientation:(UIInterfaceOrientation)orientation
{
    if(UIInterfaceOrientationIsPortrait(orientation))
    {
        //Set the array with only 1 view controller
        UIViewController *currentViewController = [self.pageViewController.viewControllers objectAtIndex:0];
        NSArray *viewControllers = [NSArray arrayWithObject:currentViewController];

        [self.pageViewController setViewControllers:viewControllers direction:UIPageViewControllerNavigationDirectionForward animated:YES completion:NULL];

        //Important- Set the doubleSided property to NO.
        self.pageViewController.doubleSided = NO;
        //Return the spine location
        return UIPageViewControllerSpineLocationMin;
    }
    else
    {
        NSArray *viewControllers = nil;
        ContentViewController *currentViewController = [self.pageViewController.viewControllers objectAtIndex:0];

        NSUInteger currentIndex = [self.modelArray indexOfObject:[(ContentViewController *)currentViewController textContents]];
        if(currentIndex == 0 || currentIndex %2 == 0)
        {
            UIViewController *nextViewController = [self pageViewController:self.pageViewController viewControllerAfterViewController:currentViewController];
            viewControllers = [NSArray arrayWithObjects:currentViewController, nextViewController, nil];
        }
        else
        {
            UIViewController *previousViewController = [self pageViewController:self.pageViewController viewControllerBeforeViewController:currentViewController];
            viewControllers = [NSArray arrayWithObjects:previousViewController, currentViewController, nil];
        }
        //Now, set the viewControllers property of UIPageViewController
        [self.pageViewController setViewControllers:viewControllers direction:UIPageViewControllerNavigationDirectionForward animated:YES completion:NULL];

        return UIPageViewControllerSpineLocationMid;
    }
}
- (void)viewDidLoad
{
    [super viewDidLoad];

    appDelegate = (AppDelegate *) [[UIApplication sharedApplication] delegate];
    //Instantiate the model array
    self.modelArray = [[NSMutableArray alloc] init];
    self.vcs = [[NSMutableArray alloc]init];

    for (int index = 1; index <= 2 ; index++)
    {
        [self.modelArray addObject:[NSString stringWithFormat:@"Page %d",index]];
    }

    //Step 1
    //Instantiate the UIPageViewController.
    self.pageViewController = [[UIPageViewController alloc] initWithTransitionStyle:UIPageViewControllerTransitionStylePageCurl
                                                              navigationOrientation:UIPageViewControllerNavigationOrientationHorizontal options:nil];
    //Step 2:
    //Assign the delegate and datasource as self.
    self.pageViewController.delegate = self;
    self.pageViewController.dataSource = self;

    //Step 3:
    //Set the initial view controllers.

    appDelegate.contentViewController.textContents = [self.modelArray objectAtIndex:0];


    NSArray *viewControllers = [NSArray arrayWithObjects:appDelegate.firstViewController,appDelegate.contentViewController,nil];
    [self.pageViewController setViewControllers:viewControllers
                                      direction:UIPageViewControllerNavigationDirectionForward
                                       animated:NO
                                     completion:nil];

    //Step 4:
    //ViewController containment steps
    //Add the pageViewController as the childViewController
    [self addChildViewController:self.pageViewController];

    //Add the view of the pageViewController to the current view
    [self.view addSubview:self.pageViewController.view];

    //Call didMoveToParentViewController: of the childViewController, the UIPageViewController instance in our case.
    [self.pageViewController didMoveToParentViewController:self];

    //Step 5:
    // set the pageViewController's frame as an inset rect.
    CGRect pageViewRect = self.view.bounds;
    pageViewRect = CGRectInset(pageViewRect, 40.0, 40.0);
    self.pageViewController.view.frame = pageViewRect;

    //Step 6:
    //Assign the gestureRecognizers property of our pageViewController to our view's gestureRecognizers property.
    self.view.gestureRecognizers = self.pageViewController.gestureRecognizers;
}

最佳答案

问题是您将一个包含两个 View Controller 的数组传递给页面 View Controller ,而它期望一次一个,将您的数组更改为如下所示:

NSArray *viewControllers = @[appDelegate.firstViewController];

您将传递其中一个 View ,但 viewControllerAfterViewControllerviewControllerBeforeViewController 将处理其余部分。

关于ios - 如何在 UIPageViewcontroller 中添加两个 View Controller ,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/15807040/

有关ios - 如何在 UIPageViewcontroller 中添加两个 View Controller的更多相关文章

  1. ruby - 如何在 Ruby 中顺序创建 PI - 2

    出于纯粹的兴趣,我很好奇如何按顺序创建PI,而不是在过程结果之后生成数字,而是让数字在过程本身生成时显示。如果是这种情况,那么数字可以自行产生,我可以对以前看到的数字实现垃圾收集,从而创建一个无限系列。结果只是在Pi系列之后每秒生成一个数字。这是我通过互联网筛选的结果:这是流行的计算机友好算法,类机器算法:defarccot(x,unity)xpow=unity/xn=1sign=1sum=0loopdoterm=xpow/nbreakifterm==0sum+=sign*(xpow/n)xpow/=x*xn+=2sign=-signendsumenddefcalc_pi(digits

  2. ruby - 我需要将 Bundler 本身添加到 Gemfile 中吗? - 2

    当我使用Bundler时,是否需要在我的Gemfile中将其列为依赖项?毕竟,我的代码中有些地方需要它。例如,当我进行Bundler设置时:require"bundler/setup" 最佳答案 没有。您可以尝试,但首先您必须用鞋带将自己抬离地面。 关于ruby-我需要将Bundler本身添加到Gemfile中吗?,我们在StackOverflow上找到一个类似的问题: https://stackoverflow.com/questions/4758609/

  3. ruby - 如何在 buildr 项目中使用 Ruby 代码? - 2

    如何在buildr项目中使用Ruby?我在很多不同的项目中使用过Ruby、JRuby、Java和Clojure。我目前正在使用我的标准Ruby开发一个模拟应用程序,我想尝试使用Clojure后端(我确实喜欢功能代码)以及JRubygui和测试套件。我还可以看到在未来的不同项目中使用Scala作为后端。我想我要为我的项目尝试一下buildr(http://buildr.apache.org/),但我注意到buildr似乎没有设置为在项目中使用JRuby代码本身!这看起来有点傻,因为该工具旨在统一通用的JVM语言并且是在ruby中构建的。除了将输出的jar包含在一个独特的、仅限ruby​​

  4. ruby - 什么是填充的 Base64 编码字符串以及如何在 ruby​​ 中生成它们? - 2

    我正在使用的第三方API的文档状态:"[O]urAPIonlyacceptspaddedBase64encodedstrings."什么是“填充的Base64编码字符串”以及如何在Ruby中生成它们。下面的代码是我第一次尝试创建转换为Base64的JSON格式数据。xa=Base64.encode64(a.to_json) 最佳答案 他们说的padding其实就是Base64本身的一部分。它是末尾的“=”和“==”。Base64将3个字节的数据包编码为4个编码字符。所以如果你的输入数据有长度n和n%3=1=>"=="末尾用于填充n%

  5. ruby - 将 Bootstrap Less 添加到 Sinatra - 2

    我有一个ModularSinatra应用程序,我正在尝试将Bootstrap添加到应用程序中。get'/bootstrap/application.css'doless:"bootstrap/bootstrap"end我在views/bootstrap中有所有less文件,包括bootstrap.less。我收到这个错误:Less::ParseErrorat/bootstrap/application.css'reset.less'wasn'tfound.Bootstrap.less的第一行是://CSSReset@import"reset.less";我尝试了所有不同的路径格式,但它

  6. ruby-on-rails - 如何在 ruby​​ 中使用两个参数异步运行 exe? - 2

    exe应该在我打开页面时运行。异步进程需要运行。有什么方法可以在ruby​​中使用两个参数异步运行exe吗?我已经尝试过ruby​​命令-system()、exec()但它正在等待过程完成。我需要用参数启动exe,无需等待进程完成是否有任何ruby​​gems会支持我的问题? 最佳答案 您可以使用Process.spawn和Process.wait2:pid=Process.spawn'your.exe','--option'#Later...pid,status=Process.wait2pid您的程序将作为解释器的子进程执行。除

  7. ruby - 如何在续集中重新加载表模式? - 2

    鉴于我有以下迁移:Sequel.migrationdoupdoalter_table:usersdoadd_column:is_admin,:default=>falseend#SequelrunsaDESCRIBEtablestatement,whenthemodelisloaded.#Atthispoint,itdoesnotknowthatusershaveais_adminflag.#Soitfails.@user=User.find(:email=>"admin@fancy-startup.example")@user.is_admin=true@user.save!ende

  8. ruby - 续集在添加关联时访问many_to_many连接表 - 2

    我正在使用Sequel构建一个愿望list系统。我有一个wishlists和itemstable和一个items_wishlists连接表(该名称是续集选择的名称)。items_wishlists表还有一个用于facebookid的额外列(因此我可以存储opengraph操作),这是一个NOTNULL列。我还有Wishlist和Item具有续集many_to_many关联的模型已建立。Wishlist类也有:selectmany_to_many关联的选项设置为select:[:items.*,:items_wishlists__facebook_action_id].有没有一种方法可以

  9. ruby - 如何在 Ruby 中拆分参数字符串 Bash 样式? - 2

    我正在为一个项目制作一个简单的shell,我希望像在Bash中一样解析参数字符串。foobar"helloworld"fooz应该变成:["foo","bar","helloworld","fooz"]等等。到目前为止,我一直在使用CSV::parse_line,将列分隔符设置为""和.compact输出。问题是我现在必须选择是要支持单引号还是双引号。CSV不支持超过一个分隔符。Python有一个名为shlex的模块:>>>shlex.split("Test'helloworld'foo")['Test','helloworld','foo']>>>shlex.split('Test"

  10. ruby - 如何在 Lion 上安装 Xcode 4.6,需要用 RVM 升级 ruby - 2

    我实际上是在尝试使用RVM在我的OSX10.7.5上更新ruby,并在输入以下命令后:rvminstallruby我得到了以下回复:Searchingforbinaryrubies,thismighttakesometime.Checkingrequirementsforosx.Installingrequirementsforosx.Updatingsystem.......Errorrunning'requirements_osx_brew_update_systemruby-2.0.0-p247',pleaseread/Users/username/.rvm/log/138121

随机推荐