前段时间我问a question about square detection和 karlphillip得出了一个不错的结果。

现在我想更进一步，找到边缘不完全可见的正方形。看看这个例子:

有什么想法吗？我正在使用 karlphillips 代码:

void find_squares(Mat& image, vector<vector<Point> >& squares)
{
    // blur will enhance edge detection
    Mat blurred(image);
    medianBlur(image, blurred, 9);

    Mat gray0(blurred.size(), CV_8U), gray;
    vector<vector<Point> > contours;

    // find squares in every color plane of the image
    for (int c = 0; c < 3; c++)
    {
        int ch[] = {c, 0};
        mixChannels(&blurred, 1, &gray0, 1, ch, 1);

        // try several threshold levels
        const int threshold_level = 2;
        for (int l = 0; l < threshold_level; l++)
        {
            // Use Canny instead of zero threshold level!
            // Canny helps to catch squares with gradient shading
            if (l == 0)
            {
                Canny(gray0, gray, 10, 20, 3); // 

                // Dilate helps to remove potential holes between edge segments
                dilate(gray, gray, Mat(), Point(-1,-1));
            }
            else
            {
                    gray = gray0 >= (l+1) * 255 / threshold_level;
            }

            // Find contours and store them in a list
            findContours(gray, contours, CV_RETR_LIST, CV_CHAIN_APPROX_SIMPLE);

            // Test contours
            vector<Point> approx;
            for (size_t i = 0; i < contours.size(); i++)
            {
                    // approximate contour with accuracy proportional
                    // to the contour perimeter
                    approxPolyDP(Mat(contours[i]), approx, arcLength(Mat(contours[i]), true)*0.02, true);

                    // Note: absolute value of an area is used because
                    // area may be positive or negative - in accordance with the
                    // contour orientation
                    if (approx.size() == 4 &&
                            fabs(contourArea(Mat(approx))) > 1000 &&
                            isContourConvex(Mat(approx)))
                    {
                            double maxCosine = 0;

                            for (int j = 2; j < 5; j++)
                            {
                                    double cosine = fabs(angle(approx[j%4], approx[j-2], approx[j-1]));
                                    maxCosine = MAX(maxCosine, cosine);
                            }

                            if (maxCosine < 0.3)
                                    squares.push_back(approx);
                    }
            }
        }
    }
}

最佳答案

您可以尝试使用 HoughLines检测正方形的四个边。接下来，定位四个生成的线交叉点以检测角点。 Hough transform对噪声和遮挡相当稳健，因此在这里可能很有用。另外，here是一个交互式演示，展示了霍夫变换是如何工作的(我认为它至少很酷:)。 Here是我以前的答案之一，它检测到显示大部分相同数学的激光交叉中心(除了它只找到一个角)。

每边可能会有多条线，但定位交叉点应该有助于确定内点与异常点。找到候选角后，您还可以按面积或多边形的“方形”程度过滤这些候选角。

编辑:所有这些带有代码和图像的答案让我觉得我的答案有点缺乏:) 所以，这里是你如何做到这一点的实现:

#include <opencv2/core/core.hpp>
#include <opencv2/highgui/highgui.hpp>
#include <opencv2/imgproc/imgproc.hpp>
#include <iostream>
#include <vector>

using namespace cv;
using namespace std;

Point2f computeIntersect(Vec2f line1, Vec2f line2);
vector<Point2f> lineToPointPair(Vec2f line);
bool acceptLinePair(Vec2f line1, Vec2f line2, float minTheta);

int main(int argc, char* argv[])
{
    Mat occludedSquare = imread("Square.jpg");

    resize(occludedSquare, occludedSquare, Size(0, 0), 0.25, 0.25);

    Mat occludedSquare8u;
    cvtColor(occludedSquare, occludedSquare8u, CV_BGR2GRAY);

    Mat thresh;
    threshold(occludedSquare8u, thresh, 200.0, 255.0, THRESH_BINARY);

    GaussianBlur(thresh, thresh, Size(7, 7), 2.0, 2.0);

    Mat edges;
    Canny(thresh, edges, 66.0, 133.0, 3);

    vector<Vec2f> lines;
    HoughLines( edges, lines, 1, CV_PI/180, 50, 0, 0 );

    cout << "Detected " << lines.size() << " lines." << endl;

    // compute the intersection from the lines detected...
    vector<Point2f> intersections;
    for( size_t i = 0; i < lines.size(); i++ )
    {
        for(size_t j = 0; j < lines.size(); j++)
        {
            Vec2f line1 = lines[i];
            Vec2f line2 = lines[j];
            if(acceptLinePair(line1, line2, CV_PI / 32))
            {
                Point2f intersection = computeIntersect(line1, line2);
                intersections.push_back(intersection);
            }
        }

    }

    if(intersections.size() > 0)
    {
        vector<Point2f>::iterator i;
        for(i = intersections.begin(); i != intersections.end(); ++i)
        {
            cout << "Intersection is " << i->x << ", " << i->y << endl;
            circle(occludedSquare, *i, 1, Scalar(0, 255, 0), 3);
        }
    }

    imshow("intersect", occludedSquare);
    waitKey();

    return 0;
}

bool acceptLinePair(Vec2f line1, Vec2f line2, float minTheta)
{
    float theta1 = line1[1], theta2 = line2[1];

    if(theta1 < minTheta)
    {
        theta1 += CV_PI; // dealing with 0 and 180 ambiguities...
    }

    if(theta2 < minTheta)
    {
        theta2 += CV_PI; // dealing with 0 and 180 ambiguities...
    }

    return abs(theta1 - theta2) > minTheta;
}

// the long nasty wikipedia line-intersection equation...bleh...
Point2f computeIntersect(Vec2f line1, Vec2f line2)
{
    vector<Point2f> p1 = lineToPointPair(line1);
    vector<Point2f> p2 = lineToPointPair(line2);

    float denom = (p1[0].x - p1[1].x)*(p2[0].y - p2[1].y) - (p1[0].y - p1[1].y)*(p2[0].x - p2[1].x);
    Point2f intersect(((p1[0].x*p1[1].y - p1[0].y*p1[1].x)*(p2[0].x - p2[1].x) -
                       (p1[0].x - p1[1].x)*(p2[0].x*p2[1].y - p2[0].y*p2[1].x)) / denom,
                      ((p1[0].x*p1[1].y - p1[0].y*p1[1].x)*(p2[0].y - p2[1].y) -
                       (p1[0].y - p1[1].y)*(p2[0].x*p2[1].y - p2[0].y*p2[1].x)) / denom);

    return intersect;
}

vector<Point2f> lineToPointPair(Vec2f line)
{
    vector<Point2f> points;

    float r = line[0], t = line[1];
    double cos_t = cos(t), sin_t = sin(t);
    double x0 = r*cos_t, y0 = r*sin_t;
    double alpha = 1000;

    points.push_back(Point2f(x0 + alpha*(-sin_t), y0 + alpha*cos_t));
    points.push_back(Point2f(x0 - alpha*(-sin_t), y0 - alpha*cos_t));

    return points;
}

注意:我调整图像大小的主要原因是我可以在屏幕上看到它，并加快处理速度。

Canny

这使用 Canny 边缘检测来帮助大大减少阈值处理后检测到的行数。

霍夫变换

然后使用霍夫变换来检测正方形的边。

十字路口

最后，我们计算所有线对的交点。

希望有帮助!

关于c++ - OpenCV C++/Obj-C : Advanced square detection，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/10533233/